|
Hole Patterns & Shapes
Vacuum Belts provide positive holding power
for very light weight products, such as paper,
plastic film and fabrics.
Hole size and pattern (percentage of open
air) can be modified to meet the application’s
need. There are endless possibilities. There
are some standard patterns available, but
usually each unique application requires its
unique hole pattern. A simple drawing with
dimensioning is all that is required to have a
die made for perforating. Please contact our
Technical Department.
Note: For vacuum applications, it is possible under
certain circumstances, to extrude urethane timing belts
with cord spacing that allows for placing the holes
between cords so that the cords are not cut during
perforation.
|
Perforating
/ Vacuum
