Cart £0.00 0

Mechanical Pin Splice

Details

  • Category: ,
  • Very Fast Belt Replacement
  • Reduced Load Capacity
  • Speeds up to 120m/min
  • Min Splice Length 700mm
  • Easily Installed by Hand
  • Tools: Hands and Pliers
  • Increases Profitability
  • Available on All Pitches

Description

“Ideal for quick timing belt installation”

Urethane timing belts with “Pin Splice”. The strongest mechanical splice for timing belts. Ideal for quick belt installations, which reduces machine downtime. Easily installed by hands with pliers.Quiet running because there are no exposed metal parts to come in contact with pulleys. Can run on your existing belt and can operate with back bend idlers. Precision fit, therefore eliminating gaps otherwise seen in competing designs. Strong enough for all conveying applications and can be custom designed according to the application strength needed. Available on most pitches, making it a “must have” for all conveying applications.

  • Easily installed by hands and pliers in seconds.
  • Increases profitability by reducing machine downtime during belt replacement. OEM’s save money in machine design because they no longer spend time making their machinery “belt installation friendly.”
  • Quiet running because there are no exposed metal parts to come in contact with pulleys. This eliminates damage to pulleys and conveyed products, potentially caused by competing metal-based alternatives.
  • Can run on your existing pulleys with the same minimum pulley requirements as your existing belt and can operate with back bend idlers.
  • Excellent for belt applications with special backings including, but not limited to Linatex, Supergrip, 85 Shore A urethane, PVC, etc.
  • Suitable for belts with profile attachments. Quick installation, reduces downtime and saves money.
  • Precision fit, therefore eliminating gaps otherwise seen in competing designs.
  • Strong enough for all conveying applications and can be custom designed according to the application strength needed, virtually matching the strength of traditional welding.
  • Available on all pitches, making it a “must have” for all conveying applications.

Easily installed by hands and pliers in seconds. Increases profitability by reducing machine downtime during belt replacement. OEM’s save money in machine design because they no longer spend time making their machinery “belt installation friendly.” Quiet running because there are no exposed metal parts to come in contact with pulleys. This eliminates damage to pulleys and conveyed products, potentially caused by competing metal-based alternatives. Can run on your existing pulleys with the same minimum pulley requirements as your existing belt and can operate with back bend idlers. Excellent for belt applications with special backings including, but not limited to Linatex, Supergrip, 85 Shore A urethane, PVC, etc. Suitable for belts with profile attachments. Quick installation reduces downtime and saves money. Precision fit, therefore eliminating gaps otherwise seen in competing designs. Strong enough for all conveying applications and can be custom designed according to the application strength needed, virtually matching the strength of traditional welding. Available on all pitches, making it a “must have” for all conveying applications.

Urethane Timing Belt Pitches

  • T5, T10, T20, AT5, AT10, AT20
  • L, H, XH
  • HTD: 5M, 8M, 14M
  • STD: 5M, 8M, 14M

Belt width availability varies depending on the belt pitch.
We do not recommend the mechanical pin splice for most drive belt applications.
Please contact our sales department for more information.

A BPS Timing Belt Splice offers many great features that will keep you up and running with very little down-time and provides a solid belt repair. Below are some of the Technical Features:

  • Allows very fast belts’ replacement, directly on machinery
  • Reduced load capacity when compared to standard joined belts
  • The back of the belt is virtually flat
  • Max suggested speed is 120m/min
  • Minimum splice length of 700mm
Available Belt Widths Belt Pitch & Width From T 10 – 25 to H-200 w/V-guide
Varies depending on the belt pitch. Belt Width (mm)
Splice Length (mm)
Max Static Load (N)
From 25 to 50.8
From 180 to 152.4
From 510 to 2,280
Please contact our sales department. Splice Number of Fingers (nf)
Min. Internal Pulley (Zmin)
Min. Inside Idler (mm)
Min. Outside Idler (mm)
From 4 to 9
From 12 to 26
From 50 to 120
From 60 to 120

To view or download, click PDF image above
TO PLACE AN ORDER PLEASE CONTACT OUR EXPERIENCED AND PROFESSIONAL CUSTOMER SERVICE TEAM:

  • PHONE: 1-800-733-5773
  • EMAIL: beltinfo@fnsheppard.com

Wish to speak with someone right away? Simply call and speak to one of our knowledgeable F.N. Sheppard experts. They will be able to begin engineering a belt that suits your needs quickly and professionally.